Current Software Versions
For information on how to obtain updates to Neoventa products, please contact your local distributor.
STAN™ S21
Current versions of Display Unit Application SW: R3A (February 2004) and R3C (April 2004)
(The R3C version is installed for serial numbers 0336 and above.)
STAN S31
Current version of Display Unit Application SW: R3C (December 2007) but SW R4C with units delivered with MPM.
The release codes for the currently installed software can be viewed in the System Status dialog, which can be accessed in two ways.
- During recording, open the System Status dialog while holding down the End menu button in the lower left corner of the GUI, and then selecting the STAN S31 System Status item.
- From the Service Functions dialog accessed by touching the Tap to access service functions field visible in the GUI during start up, select the Change Settings button and then the System Status button in the System Settings dialog.
In the System Status dialog, ensure the Internal Status view is enabled by selecting the Internal Status button:
STAN Viewer
Current version: R2I (Build 2.0.2484.603, November 2006)
You can determine the current version like this:
- Start STAN Viewer
- Click the question mark in the toolbar
or - Select "About STAN Viewer..." in the Help menu
- Note the version displayed in the About dialog: